Taped litz wire
-
High Frequency 0.4mm*120 Taped Litz Wire Copper Conductor For Motor/Transformer
In both manufacturing and design, the versatility of taped litz wire allows for customization to specific requirements, ensuring it meets the unique needs of different applications. Its ability to handle high power and high frequency signals, coupled with its excellent insulation properties, makes wrapped Litz wire ideal for industries where efficiency and reliability are critical.
-
2UEW-F-2PI 44AWG/0.05 225 High Frequancy Taped Copper Litz Wire
Taped litz wire has excellent performance and a wide range of applications. This wire uses solerable enameled copper wire with single wire diameter of 0.05mm, and a strand count of 225.
Different from ordinary film-covered wires, litz wires are covered with two layers of polyester imide film on the outside. This design helps to improve its pressure resistance.
-
Custom Made Taped Litz Wire 120/0.4mm Polyesterimide High Frequency Copper Wire
This wire is custom made. The single wire is 0.4mm solderable polyurethane enameled copper wire, 120 strands in total. The outer polyesterimide film (PI film) provides stronger insulation protection and reliability.
-
High frequency taped litz wire 60*0.4mm polyimide film copper insulated wire
Taped litz wire is a kind of wire made of enamelled round copper wire after twisting, and then wrapped with a layer of special material-polyimide film. It is mainly used for electrical connection or signal transmission between the internal or external contacts of electronic components.
-
0.04mm-1mm Single Diameter PET Mylar Taped Litz Wire
Taped litz wire comes when on the surface of normal litz wire is wrapped with mylar film or any other film by a certain degree of overlapping. If there are applications requiring high breakdown voltage, it is highly advisable to apply them to your devices. Litz wire wrapped with tape can strengthen ability of the wire to withstand flexible and mechanical stress. When used along with certain enamel, some tapes can achieve thermally bonded.
-
Customized 38 AWG 0.1mm * 315 High Frequency Taped Litz Wire
The outer layer is PI film. The litz wire consist of 315 strands and the individual diameter is 0.1mm ( 38 AWG), and overlap of the outer PI film reaches 50%.
-
0.06mm *400 2UEW-F-PI Film High Voltage Copper Taped Litz Wire For Motor Winding
There are mainly 3 series of litz wire to which we committed ourselves for decades, comprised of normal litz wire, taped litz wire and served litz wire with an annual output of more than 2,000 tons. Our Taped Litz Wire products have spread out all over the world, including European countries, Japan, Australia, Russia and other countries. Our taped litz wire can work at max. 10,000V of voltage. They are widely used in devices in need of high frequency and high voltage power conversion.
-
0.4mm*24 High Frequency Mylar Litz Wire PET Taped Litz Wire
Breif introduction: This is a customized taped litz wire, because the outer layer is covered with PET film, it is also called Mylar litz wire. The myar litz wire is composed of 24 strand of 0.4 mm enameled copper round wires, and the temperature resistance level is 155 degrees. The maximum outer diameter of the mylar litz wire is 0.439 mm, a minimum breakdown voltage of 4000V, and overlap of the outer PET film reaches 50%.
-
0.1mm*500 PET Mylar Litz Wire Enameled Copper Taped Litz Wire
which uses 2UEW enameled round copper wire with a single wire diameter of 0.1mm (38AWG), a total of 500 strands, and a temperature resistance level of 155 degrees. This PET taped litz wire is an electromagnetic wire formed by retaliating a layer of Mylar film on the outside of the enameled stranded cooper wire according to a certain overlap rate. The thickness of the Mylar film is 0.025mm, and the overlap rate reaches 52%. It increases the insulation voltage of the wire and also acts as a shield. In this way, the Mylar litz wire has good high frequency performance, high insulation strength and good heat resistance. The finished outer diameter of this taped ltiz wire is between 3.05mm and 3.18mm, and the breakdown voltage can reach 9400 volts. This wire can be used for high temperature, high voltage motor, transformer and instrument winding.
-
0.1mm*130 PET Film Copper Stranded Wire Mylar Litz Wire
At Rvyuan Wire, we equip ourselves with fine and sophisticated devices to manufacture taped Litz wire with superior quality. Taped Litz Wire, also called mylar litz wire, with a film wrapped outside, provide extra protection for the litz wire. Hence dielectric strength is strengthened. Flexibility and ability to cope with mechanical stress is enhanced as well. In some cases, taped litz wire can be a substitute for triple insulated wire in high frequency transformer. With breakdown voltage reaching up to 5KV, taped litz wire is suitable for application of operating frequency of 10kHz-5MHz and great loss of skin effect and proximity effect.
-
High Voltage 0.1mm*127 PI Insulation Taped Litz Wire
Taped litz wire 0.1mm*127 : This type of tape litz wire uses an enameled round copper wire with a single wire of 0.1mm (38awg), the temperature resistance rating is 180 degrees. The number of strands of this taped litz wire is 127, and it is wrapped with a golden PI film, which has good pressure resistance and high performance, and it also provides good electrical isolation.